Prefabricated components have to be transported in the factory as well as on the construction site. For this purpose different transport anchors are built into the component
Nailing plates are used for fastening to the formwork. After usage conical openings remain in the component. MARO®– Concrete Cones are the visually fitting seal for these openings. Independent of color or surface of the concrete.
For the attachment of eye sockets or other threaded parts, retaining plates or nail plates are used.
The holding plate is nailed, glued or fixed to the formwork with a magnet. Then the eyelet socket is glued on.
After concreting, the retaining plate is removed. The thread of the installation part is exposed.
The thread can be used, for example, to screw in lifters or rope loops with which the finished part is transported.
The apertures are closed with a matching MARO® sealing cone. This is glued in with the one-component MARO® power adhesive.
The surface of the sealing cone can be adapted to the finished part in color and surface quality (structure).
