Concrete Cone 22/10
Slightly receded to flush exposed concrete cone for the MARO 22/10/10 system
Section of the MARO - Sealing cone 22/10
Installation of the 22/10 concrete cone.
MARO sleeve cones provide sharp edged and bleeding free clamping points in exposed concrete.
System
Concrete cone for closing a support/sleevecone for an expansion pipe system with 22 mm inner diameter made of plastic or fiber concrete. Suitable for a 15 mm anchor rod.
Reference Products:
MARO®- Sleeve Cone 22/10/10 V2 or a variety of the available 22/10 sleeve cones.
Technical data of the mortar:
- Grit size: 0 – 0,5 mm
- Compressive strength: 7 days after production >= 55N/mm²
- Compressive strength: 28 days after production >= 65N/mm²
- Dangerous goods class: No dangerous goods
- GISCODE:ZP1
Mortar Properties:
cement-bound – chloride free frost and de-icing salt resistant as well as largely resistant to mineral oils and fuels. Fulfills the conditions of building material class A1 (non-combustible) according to DIN 4102-2 and EN 13501Exposure class assignment according to: DIN 1045-2 / EN 206-1XO=0; XC=1,2,3,4; XD=1,2,3; XS=1,2,3; XF=1,2,3; XA=1,2; XM=1
Color Variants:
Pigments up to 25 % of the weight of the dry mixture.
Surface-Variants:
Accessories:
Interior (dry) MARO® fire protection adhesive, exterior (no drinking water) MARO® power adhesive
Weight per piece:
20g
Piece per package:
100 Pieces (Minimum quantity for color variants 100 pieces)
Stock goods:
Available from stock in concrete gray – i.e. without specification of a pigment addition