Sleeve Cone 22/10/10 V2 resp. 26/10/10 V2
Production of clamping points. Tensioning of the formwork according to a defined anchor grid. Production of sharp-edged, bleeding and discoloration-free clamping points by means of a support cone with a closed-cell 10 mm thick sealing foam ring on the formwork side and a rear sealing foam ring between the spreader and the support cone. Pre-cut fixed lengths are to be used as expansion pipes. Cutting of the expansion pipes by...
Sleeve Cone 22/50/10 V2 Typ B
Production of clamping points Tensioning of the formwork according to a defined anchor grid. Production of sharp-edged, bleeding and discoloration-free tie points by means of a support cone with a closed-cell 10 mm thick sealing foam ring on the formwork side and a rear sealing foam ring between the spreader and the support cone. Pre-cut fixed lengths are to be used as expansion pipes. Cutting of the expansion pipes by...
Sample tenders for transport anchors
Closure of transport anchor openings in precast elements. Apertures in prefabricated parts which result from the use of transport anchor recesses (nailing plates, retaining plates) and which are in the visible area, are to be closed with closing cones in matching colors. Color and surface are to be agreed with the customer on the basis of samples. Gluing is done with a single-component, grey adhesive. Product for planning: MARO®-Sleeve cone...
Clamping point 22/50 free floating
Production of clamping points with free-floating closure. Tensioning of the formwork according to a defined anchor grid. Production of sharp-edged, bleeding and discoloration-free anchor points by means of a support cone with a closed-cell 10 mm thick sealing foam ring on the formwork side and a rear sealing foam ring between the spreader and support cone. Support cone height = 50 mm. The formwork tie has to be re-tensioned...
Clamping Point 22/10/5 receded
Production of anchor points with receded seal. Tensioning of the formwork according to a defined anchor grid. Production of sharp-edged, bleeding and discoloration-free tie points by means of a support cone with a closed-cell 10 mm thick sealing foam ring on the formwork side and a rear sealing foam ring between the spreader and the support cone. Support cone height = 10 mm. The formwork tie has...
Clamping Point 22/10 flush
Production of anchor points with flush sealing. Tensioning of the formwork according to a defined anchor grid. Production of sharp-edged, bleeding and discoloration-free anchor points by means of a support cone with a closed-cell 10 mm thick sealing foam ring on the formwork side and a rear sealing foam ring between the spreader and support cone. Support cone height = 10 mm. (e.g. MARO facing cone 22/10/10V2)...
Clamping Point 22/50 flush
Production of anchor points with sealing that is flush with the surface. Tensioning of the formwork according to a defined anchor grid. Production of sharp-edged, bleeding and discoloration-free anchor points by means of a support cone with a closed-cell 10 mm thick sealing foam ring on the formwork side and a rear sealing foam ring between the spreader and the support cone. Support cone height = 50 mm....